RAYCHEM RT-375 Clear Heat Shrink Tubing

Clear, Flame-Resistant, Flexible, Fluoropolymer Tubing

Protects wire and cable markers subject to extreme abuse while permitting full inspectability of each item covered. Provides bundling and jacketing of wires and cables, protecting them from mechanical and chemical abuse. Protects electronic components while allowing for identification and inspection.

Looking for a great starter kit. Look no further than the RT-375-KIT packed neatly in a durable plastic box loaded with all the commonly used sizes.

SAVE 20% when purchasing our precut 6" strips

Raychem/TE RT-375 Datasheet (PDF, 26 KB)

2:1 shrink ratio
Exceptional clarity and clarity stability
Toughness, chemical resistance, and high-temperature performance
High flame-resistance
Approximately 40 percent thinner walls than most general-purpose polyolefin tubings
Recommended maximum temperature for use as a primary insulator: 135°C [275°F]
RoHS compliant

Installation

Minimum shrink temperature: 125°C [257°F]
Minimum full recovery temperature: 150°C [302ºF]
Operating Temp: -55°C to 150°C [-67°F to 302°F]

Specifications/ Approvals:

UL: E35586 VW-1 600 V, 150°C
CSA: LR31929 VW-1 600 V, 150°C
Military: AMS-DTL-23053/18*, Class 2

Size	As Supplied Size Before Heating	Recovered Size After Heating	Recovered Wall Thickness
3/64	1.2mm [0.046"]	0.6mm [0.023"]	0.25mm ± 0.05mm [0.010" ± 0.002"]
1/16	1.6mm [0.063"]	0.8mm [0.031"]	0.25mm ± 0.05mm [0.010" ± 0.002"]
3/32	2.4mm [0.093"]	1.2mm [0.046"]	0.25mm ± 0.05mm [0.010" ± 0.002"]
1/8	3.2mm [0.125"]	1.6mm [0.062"]	0.25mm ± 0.05mm [0.010" ± 0.002"]
3/16	4.8mm [0.187"]	2.4mm [0.093"]	0.25mm ± 0.05mm [0.010" ± 0.002"]
1/4	6.4mm [0.250"]	3.2mm [0.125"]	0.30mm ± 0.08mm [0.012" ± 0.003"]
3/8	9.5mm [0.375"]	4.8mm [0.187"]	0.30mm ± 0.08mm [0.012" ± 0.003"]
1/2	12.7mm [0.500"]	6.4mm [0.250"]	0.30mm ± 0.08mm [0.012" ± 0.003"]
3/4	19.1mm [0.750"]	9.5mm [0.375"]	0.43mm ± 0.08mm [0.017" ± 0.003"]
1	25.4mm [1.000"]	12.7mm [0.500']	0.48mm ± 0.08mm [0.019" ± 0.003"]
**Wall thickness will be less if tubing recovery is restricted during shrinkage.